How does numerical control winding machine change the winding direction?

The value of numerical control winding machine is the large winding stroke of the winding rod. After setting, if it is running? ? When the winding rod moves to the position in the process, it will stand up, stop operation and display an error message, and then return to standby mode. When setting the limit value, you can use the number keys to set it, and you can also use the [Skip Segment] and [Return Segment] keys to set the value in the teaching mode. When the limit value is set to [999.99], there is no limit. 1. Ensure that the winding machine is properly grounded to prevent the induced current from flowing into the control circuit, which will affect the operation of the winding machine and effectively prevent the occurrence of electric shock. The workbench or ground where the winding machine is placed must be stable and reliable to prevent vibration and falling. 3. Keep away from heat sources, magnetic sources, vibration sources, etc. 4. Do not use winding machines with super large wire diameter and super high speed. 5. Do not touch the moving parts when the winding machine is running at high speed.

Unprotected contact can lead to difficult and unexpected consequences. Be careful not to let the hair get involved in the automatic winding machine. The hair accidentally wound on the platform should be caught with a hairpin or short hair. Hair is not allowed. 6. It is forbidden to disassemble any parts of the winding machine for non-equipment maintenance projects. Looseness of mechanical parts will make the winding machine unstable, reduce the product qualification rate, and seriously lead to high-speed throwing of parts, which is dangerous. If the electrical components are loose, the machine will not work normally. Seriously, there is a danger of electric shock, even if it causes a fire. 7. Fixture installation should ensure that the screws are in place, frame installation should ensure that the coordination is in place, and the hanging line is to ensure that the outgoing line will not interfere with the continuous winding action.

Website: https://www.zhengtaifeng.com/