With the improvement of automatic processing ability of winding machine, precision parts are constantly applied to winding machine operation.

The understanding of winding width is the distance from the winding start position to the winding end position. Usually, this value directly reflects the required winding length of the skeleton. When setting, it is necessary to consider the influence of the slight deformation of the used skeleton on the winding width, and a small value should be taken as the winding width by comprehensive measurement.

The wire arranging parts of automatic winding machine usually adopt the combination of stepping motor and ball screw, so that the wire arranging frame can move horizontally. The stepping motor can choose type 57, and the ball screw usually chooses 5MM pitch. Through subdivision control, the screw can run smoothly, and the control accuracy can reach 0.025mm, which can meet the processing requirements of our common enameled wires.

Our common simple numerical control winding machine, this kind of winding machine has relatively simple functional requirements, and its winding process is completely completed by the manual work of the operator. The configured control system generally has speed regulation, lap number control, forward/reverse switching and so on, and the control core is generally a single chip microcomputer circuit.

All users can feel the improvement of the automatic processing ability of the winding machine, and various high-end sensors, high-precision transmission parts, servo systems and other precision parts are constantly applied to the control of the winding machine.

When the casting foundation is installed on the winding machine, the specific positions of the automatic winding machine supplier, equipment lubrication system and electric control system can be reasonably arranged and adjusted according to the specific needs of production and the utilization of the overall installation space, and the automatic winding machine can be automatically wound, but the installation order of the electric control system and lubrication system should not be changed, so as to prevent serious production accidents.

The controller system independently developed by Zhengtaifeng Machinery Manufacturing Co., Ltd. adopts PLC control+servo system, and the display is touch screen, which is simple in operation, stable in operation and clear in data, so that the operating staff can easily master and get started, and help customers achieve the enterprise goals of low cost, high efficiency and high income. At the same time, we can design matching machines according to customers' product requirements, and seek better solutions for product production.

Website: https://www.zhengtaifeng.com/