Introduction of speed mode of automatic winding machine

A, automatic winding machine AC motor speed regulation form:

These motors themselves have no speed control function, and they need electromagnetic control to install devices or drivers to complete the speed control function. Compared with winding and installing inverters, it is a common way. The winding machine winding passes through the equipment of the control system that controls the speed of variable frequency motors, and this method also plays a role in energy saving.

It can be combined into a high degree of automation equipment by motors, electric components, pneumatic components, transmission devices, sensors, control systems, etc. Usually, it can automatically arrange wires, wrap heads, break wires, twist wires and load and unload materials. Operators only need to ensure sufficient raw materials, and replace them in time when there are no workpieces or copper wires, so as to ensure continuous production, usually with a high number of shafts, so as to achieve high-efficiency production. A machine with a high degree of automation can meet the requirement that an employee can take care of multiple devices at the same time.

Alarm processing of servo driver for winding machine's wire arrangement

During the debugging process, the servo driver of winding machine takes the initiative to wire the servo driver, which often gives an alarm for faults. The reason is usually that the communication between the encoder and the servo driver is abnormal. After the servo driver is powered off, the connecting plug CN2 between the encoder and the servo driver is unplugged again, and the fault is relieved after the power is turned on again.

Most automatic winding machines use electromagnetic brake to control the parking position of the winding spindle. Generally, manufacturers will adjust the brake in place when they leave the factory. However, after a period of operation, due to the frequent use and wear of the brake, there will be problems such as abnormal noise of the brake and deviation of the parking position. If the demand is bound around the specified point or the coil across the slot is biased, the enameled wire will not be normally embedded in the slot, so as a user-controlled solution, the efficiency of the equipment will be more effectively exerted.

Website: https://www.zhengtaifeng.com/