Analysis of common problems in starting automatic winding machine

In order to better integrate into the manufacturing process of electromagnetic coil, automatic winding machine needs to be equipped with spindle bearing speed change function, and the winding machinery and equipment should be equipped with different types. There are three kinds of servo motors that we know better: AC motor, DC motor and servo motor drive motor, and the speed change methods used by this motor have different characteristics.

Analysis of common problems in the start-up of automatic winding machine. The advantages and disadvantages of automatic winding machine are related to its output power, handleable technology and unqualified rate. Besides, some characteristics of automatic winding machine during start-up will also endanger whether the equipment can run normally and firmly for a long time:

1. It should be stable when starting, and the single-machine weight of double-clear automatic winding machine can reach 800KG, which can reasonably ensure the long-term stable operation of the equipment.

2. The starting torque must be large enough so that the automatic winding machine can beat the torque resistance and start.

3. The starting current should be as small as possible, because the electronic components and circuit boards of the automatic winding machine are all relatively weak.

FREQUENTLY ASKED QUESTIONS

1. It is best to maintain the level of the working center of the automatic winding machine, so that the installed equipment can operate firmly and smoothly after coming up. The machinery and equipment must be grounded, and it is required to make sure that there is no interference signal around.

2. The road surface installed on the winding machine of transformer should have compressive strength and bending rigidity, so as to prevent the winding machine from vibrating strongly in the whole process of work, to keep the vibration within a certain range, and not to endanger the precision and service life of machinery and equipment, and also to prevent the quality of electromagnetic coils from being harmed.

3. If the winding machine is placed in a natural environment that may be corroded by organic chemical liquid, hydraulic oil or corrosion, the corresponding safety protection should be done well.

Website: https://www.zhengtaifeng.com/