After purchasing, the fully automatic winding machine should be fully utilized, especially in the year it is put into use, so that the weak links that are prone to malfunctions can be exposed as soon

After purchasing, the fully automatic winding machine should be fully utilized, especially in the year it is put into use, so that the weak links that are prone to malfunctions can be exposed as soon as possible, and can be eliminated during the warranty period. When there is no production task, the winding machine should also be regularly powered on, preferably 1-2 times a week, with an idle operation of about 1 hour each time, to use the heating capacity of the winding machine components to reduce the humidity inside the machine and prevent electronic components from getting damp, At the same time, it can also detect any low battery alarm in a timely manner to prevent the loss of system setting parameters.

There is a significant difference between fully automatic and semi-automatic wire winding machines, but for the purchaser, a simple summary is that it only requires a person to load the vibrating plate (i.e. dumping the skeleton, which is a professional term in the wire winding machine industry), and can handle several wire winding machines simultaneously by one person, which is relatively expensive; The other one requires manual feeding (usually one person corresponds to one winding machine, placing the skeleton on the fixture), which is relatively cheap; This is a semi-automatic wire winding machine that requires manual feeding. Without a vibrating disc, people sit in front of the machine and manually install the skeleton onto the fixture. The rest is automatically completed by the machine, and can be produced through a belt line to further improve production efficiency. The correct operation and maintenance of the winding machine is one of the key factors for the correct use of the winding equipment.

How to choose between fully automatic and semi-automatic winding machines? That depends on the order quantity and scale of your own factory. If the quantity is large, you can choose to use both fully automatic and semi-automatic winding machines together! Because the production process of fully automatic wire winding machines is fully automated, the corresponding requirements for employees will be relatively low. Production can be carried out without receiving high-quality training, which not only saves labor but also improves productivity, and there will be no manual operation errors like semi-automatic wire winding machines. If conditions permit, it is recommended that everyone buy a fully automatic wire winding machine, After all, its work efficiency is higher, and the possibility of some unnecessary losses is relatively low.

Correct operation and use can prevent abnormal wear and tear of equipment and avoid sudden malfunctions; Good daily maintenance and upkeep can maintain the equipment in good technical condition, delay the deterioration process, timely detect and eliminate potential faults, and thus ensure safe operation.

Website: https://www.zhengtaifeng.com/