Talk about the speed mode of the automatic winding machine

The automatic winding machine does not require manual operation, so there is a high demand for professional operators to adapt to the process. The coil winding machine is equipped with automatic spindle speed control function. Due to the different types of winding machines, their configurations are different. Everyone is familiar with the types of spindle motors: AC motor, DC motor, these three servo drive motors, and the use of speed regulators. These motors have their own characteristics. Below, let's talk about the speed mode of the automatic winding machine:

1、 Automatic winding machine AC motor speed regulation mode:

These motors themselves do not have speed control function, and they need to be installed or driven by electromagnetic control devices to achieve speed regulation function. We compare the winding device with the inverter, which is a common method. The winding is connected to the equipment of the speed control variable frequency motor control system, and this method also has an energy-saving effect.

2、 DC motor speed regulation fully automatic winding machine mode:

DC power needs to be converted into DC power to drive the motor, so DC motors are equipped with brushless DC speed control boards or control motor drives to drive, as motors are used in small applications with a small number of large winding equipment.

3、 The method of servo driving motor speed for fully automatic winding machine:

It is a precision moving component for high-precision winding equipment, as well as a dedicated drive used to achieve closed-loop operation control. The main characteristic of this type of engine is constant torque, and in closed-loop operation, the design meets the processing requirements of precision coils.

Most automatic wire winding machines use electromagnetic brakes to control the parking position of the winding spindle. Generally, the manufacturer adjusts the brake in place when leaving the factory. However, after a period of operation, due to frequent use and wear of the brake, problems such as abnormal noise and deviation in the parking position may occur. If it is necessary to wind the fixed point winding foot or cross slot coil, deviation may occur, As a result, the enameled wire cannot be properly embedded in the slot, etc., the handling method mastered by users will more effectively utilize the efficiency of the equipment.

Website: https://www.zhengtaifeng.com/