Notes on installing winding machines

Since the installation of the equipment, there have been some issues that will affect its future service life, so we need to pay special attention. For example, to avoid damage to the equipment foundation after casting and installation, a protective plate is usually placed on the upper part of the foundation to ensure the service life of the winding machine foundation.

During the installation process, there are many aspects that require our attention and consideration, such as comprehensive consideration of the environment, geological conditions, climate and temperature. When installing equipment, we need to measure and control the depth of the foundation based on the geological conditions of the installation site, make appropriate judgments, and ensure that the winding machine is fixed and installed on a stable reinforced concrete foundation.

When installing the casting foundation of the winding machine, the specific positions of the equipment lubrication system and electric control system can be reasonably arranged and adjusted according to the specific production needs and the overall installation space utilization. However, it is necessary to ensure that the installation sequence of the electric control system and lubrication system cannot be changed to prevent serious production accidents.

When using the winding machine, the following points should be noted: 1. When using, the winding machine should be fixed on the operating platform. When the number of turns in the winding machine is not starting from zero. The number of turns indicated at the beginning should be recorded and subtracted after winding. 3. When using the wire winding machine, the wire should be tightened and straightened by hand, and excessive force should not be used to avoid breaking the wire.

After checking that there are no abnormal situations, the equipment that can start the winding can be started normally. The operation during the working process is also strictly in accordance with the application rules. There are many equipment that may pose varying degrees of harm due to careless operation. During the application process, it is necessary to operate with caution and not do anything unrelated to the operation. Due to this incident, the equipment was suspended and the power and gas were turned off, as requested by the surrounding technology. It is not allowed to arbitrarily add turns, wire diameter, and wire speed.

Website: https://www.zhengtaifeng.com/