Manufacturers of winding machines introduce methods for dealing with transformer winding machine faults

The structure of the transformer winding machine is mainly composed of the body, frame, main shaft mechanism, tail frame support, base and other components. Due to the weight of the transformer coil and the need to withstand external forces such as knocking and shaping during processing, the body and frame of the winding machine are made of steel with strong load-bearing capacity. According to the processing capacity of the machine, they are divided into three categories: small, medium, and large, and their load-bearing capacity is also different.

During the operation of the transformer winding machine equipment of the winding machine manufacturer, there may also be a lack of safety in the winding function. This is caused by various factors, which can have a significant impact on the production and processing manufacturers, leading to a decrease in production capacity and loss of customer groups. This has a significant impact on the factory's future development. Therefore, in the event of a lack of safety in the winding function, what changes need to be made to address it, Here's a comprehensive introduction:

Part question: When the transformer winding machine processes goods, the winding effect does not meet the practical production demand level, which is closely related to the components of the winding equipment. During the continuous use of the winding equipment, the processed goods will cause certain wear and tear to the equipment, resulting in serious damage to the parts. It is difficult to achieve the practical demand level for product winding, and appropriate changes need to be made to the maintenance operation of the parts, It is not necessary to carry out maintenance operations in a certain period in the future, but to add a smooth dosage in a timely manner after the completion of product processing to slow down the wear and tear of parts, which can reduce the unsafe winding effect.

When the transformer winding machine of the fully automatic winding machine manufacturer shows that the winding effect is insufficient, it is important not to open the equipment without permission to make adjustments. This is likely to cause problems that have not been resolved, but rather to add more application questions. It is good to have the manufacturer's professional personnel carry out corresponding adjustment operations.

The inaccurate parking position of the spindle is generally caused by brake failure. For example, if the brake pads are loose or worn. It is also related to the setting of the braking time, as too short a braking time can lead to inaccurate spindle parking position. Need to replace brake pads or. Adjust the braking time.

If the counting of the transformer winding machine produced by the fully automatic winding machine manufacturer is inaccurate, it is generally due to hardware issues with the sensor or controller. In this case, the transformer winding machine cannot work, and the manufacturer is usually notified to repair and solve the problem.

Website: https://www.zhengtaifeng.com/