Talk about the relevant knowledge of the winding machine manufacturer transformer winding machine

The transformer is a large electrical part, so the structure of the winding machine is large, and the weight is also from several hundred kilograms to several thousand kilograms according to the level of the winding machine. Due to the use of modern technology on the transformer winding machine, the new model The function of becoming more powerful, the presentation of flexible pre -compressing device replaces the cumbersome craftsmanship of traditional artificial knocking and plastic surgery, making the transformer winding process easier.

The transformer winding machine is composed of integrated circuits of many electronic components, and its insulation performance has a lot to do with the environmental humidity. Excessive humidity can easily cause the circuit board to be burned and burned; the humidity is too small, it is easy to generate static electricity, and it will also break through some electronic components. Therefore, too much humidity and too small will bring potential threats to transformer winding machines. Secondly, there is a high sense of ground shock. Many factories need to produce physical positions such as drag and vibration in the production of factories, which not only brings huge noise, but the violent vibration brought by the machine may cause damage to the transformer winding machine, so When the transformer winding machine is placed, the transformer winding machine is far from the large work site as much as possible; if the working location cannot be changed, the sponge and the buffer object should be placed under the main body of the transformer winding machine to reduce it to reduce The harm brought by small vibration.

The common functions of transformer winding machines include circle presets, automatic parking, front and reverse winding, automatic steps, etc. In actual use, it should be noted that a few points are first. The item function is to run slowly after the device is started. The purpose is to reduce the impact of the structure and lacquer lines. You can set the general situation of 1 to 3 times according to the actual needs. This function can reduce the impact of the brake device to make the device smoothly end the winding, especially the winding process that requires precise positioning. This parameter must be set. Depending on the operating speed of the device, the parameters should be adjusted accordingly as the general situation is the general situation. 2 to 5 times, once again the direction and winding direction. These two parameters are settings for the direction of the line displacement and the main axis rotation direction. There is a specific linkage relationship. When setting, it is necessary to clarify the direction of the row axis. Many users refer to the equipment alarm during debugging. This is because of the equipment protection caused by the error.

 There are two future development directions of transformers: one is ultra -high pressure, large capacity, and the other is efficient, intelligent, small and low noise. The quality and economic and technological performance of the transformer depends to a large extent on the influence of structural design, depending on the technical level of manufacturing technology and manufacturing equipment. In order to meet the increasing requirements of transformer quality and performance indicators, winding machine manufacturers must improve the technical level of transformer foil winding machine, so that it can produce transformers that can meet the needs of national power development.

Zhongshan Victoria Machinery Manufacturing Co., Ltd. has continued to work and build production by transformer winding machines. Practice has proved that many faults can be reduced by the month of compliance with operating procedures. Do not make full use of the equipment after the purchase of purchases, especially the first year of being put into use, so that the weak links that are prone to failure are exposed as soon as possible. It can be eliminated during the warranty period. Regularly power -on, it is a weekly power to be powered by 1 to 2 times, and the air runs for about 1 hour each time to reduce the humidity inside the machine by using the heating capacity of the winding machine component itself, so that the electronic component does not cause the moisture. The battery -free power is less than the alarm, which can prevent the system setting parameters from being found.

Website: https://www.zhengtaifeng.com/