What are the speed adjustment methods for the processing process of the coil of the winding machine?

The main axis of the winding machine manufacturer's winding machine refers to the power shaft that provides rotating power to drive the lacquer cable rotation. The main shaft configuration of the winding machine with different specifications is different. Together adjustment and additional winding processes, the adjustment of the axis position is generally due to the distance between the spindle between the spindle and the table during the winding process of the winding machine during the winding process. The adjustment of the axis position should pay attention to the size of the opening of the fuselage, and whether the adjustment will affect the normal operation of other components after adjustment; the adjustment of concentricity is common. The degree will be deviated, and timely maintenance and adjustment will be required.

In the application in the spindle system of the winding machine, the spindle system of the winding machine is mainly composed of three parts: motor, speed regulation system, and control system. Early winding equipment mainly uses DC motors and electromagnetic speed regulating motors. Because these two motors are used A series of problems such as difficulty in maintaining difficulties, low control accuracy, and high failure rate. After the appearance of the inverter, these backward control methods can be replaced. The frequency conversion control system is generally adopted in the speed mechanism.

 AC motor is a common motor in our Z. This type of motor itself has no speed regulation function. The speed regulation method controls the motor to have a speed regulation function through the control system control system control system. This method also has a certain energy -saving effect.

 At present, our common DC motors include the following two DC brushes and DC brushless brushes. DC motors need to convert the supply of power supply into DC power to drive the motor. The motor, because the size of the motor is large in small winding equipment.

The servo motor was used in automatic winding machines in recent years. It belongs to precision motion components suitable for high -precision winding equipment. It is used to use closed -loop operation control with special drive. Morning and closed -loop operation are used to meet the processing requirements of high -precision coils.

Most of the wires of the winding machine manufacturer winding machine are mostly copper wires (the inductance coil of the electronics, electrical products), the lacquered aluminum line, and the textile line (gauze bloom, thread group for winding textile machines), There are also electric lines, welds, wires, cables, etc. used by winding electric heaters and welds, wires, cables.

Website: https://www.zhengtaifeng.com/