Fully -automatic winding machine system adds automatic improvement function on the closing and putting line parts

The power system of a fully automatic winding machine mainly provides power supply for industrial control computer and motion control cards. In order to protect the full -automatic winding machine, due to the sudden power loss, the system and software are affected. The power supply line is independently distributed power supply and equipped with a 500W voltage voltage power supply for the industrial control machine. Make sure the industrial control computer continues to run for more than half an hour when the power is disconnected. The servo driver and equipment heating system are shared with a power supply system. The system power supply power is 1.5 times that of the equipment design power.

The control signal of the full -automatic winding machine manufacturer's servo drive, the system output signal of the system is isolates the output through optocoupler; the encoder is the grating ruler feedback signal, the limit signal, and the input of the main control operation switch signal all uses the optocoupler on the control card through the control card. Send the control card to the control card. The electrical isolation of the industrial computer and the rest of the equipment. Therefore, the Z to ensure the reliable and stable operation of the industrial control computer and the motion control card, and in addition, the equipment shell is safely grounded.

The D -automatic winding machine system of the fully automatic winding machine manufacturer consists of a servo module, frequency conversion module, displacement weight module, PLC control module and human -machine interaction touch screen module. When the system is running online, the main shaft of the lines of the line uses vector control for active operation. Its control process contains two closed -loop systems, one is directly connected to the encoder and motor spindle, and a vector control that constitutes a closed loop with the inverter; the other is after the gear deceleration The wire axis is directly connected to ensure that the number of countdles is accurate. The combination of PID and BANG-BANG uses a combination of PID and BANG-BANG to match the real-time speed matching speed of the wire-closing motor. Compared with the cylinder matching Shi Ze has added a systematic stable operating domain. The system of the system uses Schneider's servo controller to ensure the precision of the lines. In order to facilitate the upper and lower lines, the system increases the automatic improvement function of the scroll in the closing part and the put line. In order to ensure the safety of the system's operation, the left and right limits of the lines, the upper and lower limits of the line and the line of the line, the upper and lower limits of the line frame, the upper and lower limits of the weight block, and the emergency stop.

 The full -automatic winding machine mainly contains the wire rack and wiring rack. The speed of the row frame is determined by the line rack speed of the active running system. Its speed matching accuracy determines the tential effect of the wire wheel. And the lane rack must be reasonably matched with the active running system to complete the normal release line of the winding machine. It determines the follow -up performance of the entire system. Essence

 Putting the wire rack consisting of dynamic pulleys, bases, bottom plates, straight wire guide rails, tooth strips, supporting seats, heavy -line direct -wire guide rails, fixed pulleys, active motors, active support, etc. For the constant pull force of the wire, and the pressure sensor, the accurate weight of the extension can be detected, and the error is less than 1%. The auxiliary supporting part can be loaded and unloaded, and 2 cylinders are installed on both sides of the column, which can improve the wire wheel. A shaft is installed with 1 cylinder. You can complete the installation and positioning process of the wire wheel through the axial top top wheel.

Website: https://www.zhengtaifeng.com/