Speed regulation mode and detection mode of automatic winding machine in equipment

First, AC motor speed regulation method: There is no speed regulation function itself. It needs to achieve the speed regulation function through electromagnetic speed regulating device or installed inverter. In a fully automatic winding machine Inverter speed regulation method, the control system controls the inverter through the control system of the winding device to make the motor have a speed regulating function. This method also has a certain energy-saving effect.

Second, the speed regulation method of DC motor: DC motors need to convert the supply of power supply to DC electricity to drive the motor to run. The amount of application in the winding device is large.

Third, the speed regulation method of servo driver motor: It is a precision motion component suitable for high -precision winding equipment. It is used to use closed -loop operation control with special drivers. This type of motor Z is characterized by constant torque and closed -loop operation. Used to meet the processing requirements of high -precision coils.

https://www.zhengtaifeng.com/en/raoxianji/500.html

After buying an automatic winding machine, we need to check the new equipment for acceptance and testing. So how to accept the winding device? At present, there are no very clear standards for reference. Many users often judge based on their own experience. This exists in the device. The details of the above details are often not found. Generally, it should be detected according to the following steps:

The first is visual inspection and measurement. You can observe the appearance of the device and whether the equipment and various configurations are complete in the process of the installation of the equipment. During the assembly process, check the contact conditions and smoothness of various slide parts. To measure the same axia, check the lubrication of various related action sites, and should be stable, reliable, and unobstructed.

The second step of the detection is the air rotation operation. When the air load is running for about 30 minutes, check the significant temperature rise of each bearing site and sliding parts. The position accuracy of the parking is detected when the tank is detected. At the same time, the brake is valid, and the tensioner and the cross wheels in the cross -line device are smooth and smooth.

After the automatic winding machine runs through the air rotation, it needs to be running with a line. During the line, the number of winding wanders should be calculated accurately, whether the row device moves smoothly and correctly. Whether it is flat and compact, whether the insulation layer of the lacquer line is good.