- 4 types of winding tensioners
- Comparison of ruby nozzle and tungsten carbide nozzle
- Winding machines can be divided into several types
- Classification of sprayed ceramic guide wheels
- What kind of special oxide ceramics are divided into? How strong is its high temperature resistance? (picture)
- The application range and type of fully automatic winding machine
E-mail：ztfhuangwenshi@163.com
Phone：+86 15625080946
TEL：+86 0752-6911339
Address：Hushan No.1 Industrial Zone, Shiwan Town, Boluo County, , Huizhou city GuangDong Province China Town/Area Code: 516127 CHINA
What is the difference between electronic tensioner and mechanical tensioner maintenance?
What is the difference between electronic tensioner and mechanical tensioner maintenance?
Maintenance and precautions of electronic tensioner:
To provide stable DC24V power supply.
The tension rod is best used in a horizontal position up to 15 degrees.
Do not apply applied pressure or impact force to the shaft connected to the tension rod, because the shaft is connected to a high-precision sensor which will affect its accuracy and normal use
The 3 adjustable resistors on the board do not adjust themselves.
Do not plug and remove the power connector frequently.
Do not keep it in a dry environment for a long time.
When installing mechanical tensioning device, the handle should not be too hard, which will affect the firmness of the inlaid parts.
Prevent falling, will damage the ceramic parts and shell.
When the tension rod is installed, the locking screw should be aligned with the shaft plane.
When using the line and the model does not match, do not force to use.
https://www.zhengtaifeng.com/index.php/en/WireTensioners/308.html
Mechanical tensioner maintenance and precautions:
To provide stable DC24V power supply.
The shaft connected with the tension rod should not be given external pressure or impact force, because the shaft is connected with a high-precision sensor, which will affect its accuracy and normal use.
Do not plug and remove the power connector frequently.
Do not keep it in a dry environment for a long time.
When installing mechanical tensioning device, the handle should not be too hard, which will affect the firmness of the inlaid parts.
Prevent falling, will damage the ceramic parts and shell.
When the tension rod is installed, the locking screw should be aligned with the shaft plane.
When using the line and the model does not match, do not force to use.
Do not add any grease in the damping wheel.
https://www.zhengtaifeng.com/index.php/en/WireTensioners/324.html
- Previous：The structure of the automatic winding machine is divided into several?
- Next：Zhengtaifeng Analysis of the structure of ceramic pulley and anti -jumping wires:
