The structure of the automatic winding machine is divided into several?

The automatic winding machine consists of nine parts:

(1) Rack: The rack is composed of an angle steel frame and a stainless steel table, and is equipped with casters for easy movement. When the equipment is in place, the feet can be lowered as a stable support.

(2) Tension mechanism: It is installed on the incoming part to adjust the winding tension to ensure constant tension when the coil is wound. The tension adjuster has an adjustment knob to adjust the tension according to different needs. Automatic control of winding tension.

(3) Fully automatic winding mechanism: It is mainly composed of Delta B series 200W servo motor, synchronous toothed belt, and winding fly fork. It is the winding spindle in the movement of the electronic cam. On the wire die head, it is one of the main moving parts of the automatic winding machine.

(4) Wiring mechanism: including Delta B series 100W servo motor, precision linear screw, precision guide rail, pneumatic sliding fork, etc. It is the wiring slave axis in the electronic cam movement, and follows the winding spindle in the winding movement. It is one of the main moving parts of the fully automatic winding machine to realize the arranging action in the reciprocating motion.

(5) Working turntable: It is composed of an indexing stepping motor, a rotary table, a wire fork, and a winding die head. This equipment is a multi-task full-automatic winding machine. Process actions such as heating and demoulding require the work turntable to be completed according to different station actions.

(6) Thread trimming mechanism: It is a pneumatic actuator, which mainly cuts off the leads at both ends of the coil that has been wound.

(7) Demoulding mechanism: It is composed of an indexing stepper motor and a pneumatic demoulding, which removes the finished product from the winding die.

(8) Hot air system: The equipment is equipped with two adjustable temperature 220V hot air guns. The die head is preheated before winding, and the coil is treated with hot air after winding to facilitate demoulding.

(9) Electrical control: including electrical control box, touch screen operation box. The DVP-20PM00D motion controller is used as the control core, the touch screen is used as the man-machine exchange, and the servo motor is used as the actuator to realize the precise control of the rotating shaft and the cable, thus ensuring the winding accuracy.

Product link: https://www.zhengtaifeng.com/en/raoxianji/503.html