Machine Feature:
Four spindle synchronous design, uses the cast iron body, high speed, low noise, small size,is the preferred product assembly line.This machine design of 32 bit controller chip, It’ll be faster, and higher reliability.In Chinese and English display,easy to operation,winding data retention after power failure, not to discarded products。All the parts for this machine are imported prats,such as:Japan Bearing (NSK、NTN),Japan BANDO belt ，U.S.A GATES belt ，Taiwan Ball screw (TBI)，Taiwan AC Drive and so on.
Function:
1.Using the LCD latest synchronization with the coupling cable controller.
2.With self detection, including setting error, speed tracking and velocity calibration optional lifting speed of main spindle.
3. To start the operation speed of the spindle motor to climb time can decide for ourselves, to guarantee the product quality of winding.
Application range：
EE & EI transformer coil , Synchronous motor coil,Shaded pole motor coil ,Solenoid valve coil , Relay coil , Clock coil and any other special coils.
Specifications：
| Spindle number | 4 |
| Wire size range | 0.05-0.35mm |
| Loop diameter | 80mm |
| The max wire spacing | 9.99mm |
| Winder width | 100mm |
| Spindle pitch | 165mm |
| Max speed | 6000RPM |
| Spindle motor | Three Phase motor+AC Drivers |
| Winder motor | 步进电机Stepping motor |
| Input power | 220V 50HZ/60HZ |
| Machine size | 930×490×630mm |
| Package size | 1000×600×740mm |
| Net weight | 85kg |
| Gross weight | 135kg |