Features
- The tension range is large, and the latest anti-jumping structure is adopted;
- The tension scale corresponds to the uniform precision of the tension value, which is convenient for the debugging of multiple machines;
- The installation hole diameter is 016mm, the vertical structure, the swing range of the anti-tension rod is large Take-up is long;
- Tension generation uses multiple pairs of NS magnetic fields, no mechanical friction, and good tension stability;
- Main components: 0-shaped ring, all bearings are imported high-quality products;
Test Conditions：
The linear speed is 10m/s, and the line starts instantly and stops in an emergency. The tension of uniform winding state is stable at ±1%g
Precautions：
- Read the product manual carefully before use;
- If you stop using for a long time and the damping wheel shakes, you must perform degaussing treatment before starting up: first adjust the tension clockwise to the maximum value, and then immediately adjust the tension to the minimum counterclockwise to complete it. Degaussing treatment;
- When debugging, first adjust the tension to the required scale position, and then adjust the anti-tension knob to make the tension bar work between the two red marking lines;
- Reasons for the tension value not to be adjusted: 1) Wool pre If the tightening force is not enough, the pressing force of the wool felt should be adjusted; 2) O-ring and wool felt are too dirty, clean or replace in time;
- When adjusting the tension or back tension, stop the winding machine first;
- Sheep Please replace the thickness of the felt with the specifications at the factory, otherwise it will cause the thread to not pass smoothly.
