What are the differences and advantages between grinding machine ceramic sheets and ordinary ceramics

Alumina ceramics are a type of industrial ceramics that can be used to create ceramics that can replace metal parts through reasonable processing. Ceramic parts have a longer service life.

Characteristics of alumina ceramics: Firstly, it has high strength, and its Rockwell hardness can reach HRA80-90; Its wear resistance is very good, which can be higher than that of alloy steel and high chromium cast iron, and can increase the service life of machinery and equipment by more than ten times; Secondly, the net weight of alumina ceramic sheets is very light, with a relative density of 3.65g/cm, which can greatly reduce the load on the equipment; Aluminum oxide ceramic sheets are firmly bonded on equipment with good heat resistance, and can operate for a long time without aging at 350 ℃.

What is the basic principle of grinding equipment for ceramic products? Raw material composition and brand advantages of ceramic board components for grinding equipment!

1. Base steel plate: use milky white double-layer alumina ceramic, а- Al2O3 composition not less than 95%

2. Wire: selection Ф 0.48mm nickel wire.

3. Waterproof sleeve, tape paper: Teflon, high-temperature resistant adhesive

4. Resistance: high-temperature materials such as tungsten

Grinding equipment ceramic, which is a reliable grinding flat plate with a round or square appearance design that causes surface heat without induction and no open flame after being connected to the power supply. The heating plate has high thermal efficiency due to its crucial reliance on heat conduction during application

Alumina ceramics are one of the materials with excellent comprehensive performance in the structural ceramic family, and are considered one of the promising high-temperature structural ceramic materials. Alumina ceramic chips have high bending strength and fracture toughness, such as those prepared by hot pressing sintering. At room temperature, bending strength can reach 800-1050 MPa, fracture toughness can reach 6-7 MPa · m1/2, and it has good wear resistance and certain self-lubricating ability

Website: https://www.zhengtaifeng.com/