What are the main parameters that the motor stator winding machine must set?

What are the main parameters that the motor stator winding machine must set?

In the actual operation of motor stator winding machine, the first important basic parameter is the basic parameter about the starting point of winding. If the starting point is set according to different winding processes, the starting point will have different conditions. In some cases, it is very likely that it is necessary to carry out measurement, and then clarify the location of the data information of this starting point and type this data information into the machinery and equipment. It is very important to pay attention to the basic parameters of the starting point, because this will endanger the orientation of winding and its winding speed. The second key parameter is the setting of the diameter of a circle in the case of winding. Generally speaking, the setting of this diameter must be adjusted within 5%. In particular, some materials are likely to have certain ductility. For example, the ductility of copper core wire and aluminum coin will be different. Therefore, after the diameter is set, it must be adjusted immediately, so as to achieve a stronger supporting force to match the actual effect. -Winding machine manufacturer

The third key basic parameter in the application of motor stator winding machine is large format. This main parameter is very important, that is, how much is the distance between the bottom circle and the outer circle in the case of winding? This is to put it bluntly. It should be noted that this main parameter will endanger the total length, and then it will also endanger the appearance size after the final winding is successful. The setting of large format usually has a correction value. Different raw materials will be revised differently when winding work is carried out. Naturally, other basic parameters are likely to appear, such as winding the second layer after winding the first layer. Is there a pause between Layer 2 and Layer 1? If there is, you can set this role. In addition, the winding speed can also be set in the machinery and equipment. -Automatic winding machine manufacturer

1. According to the left and right movement of the nozzle and the rotation of the transformer core, winding can be done according to the voluntary movement trajectory. Therefore, a few windings with different transformer cores and different transformer cores are matched according to the winding program flow on the computer.

2. All abnormal and common faults in actual operation are reminded of actual operation and maintenance by man-machine exchange.

3. The thread method other than the number of turns of foot winding can be set at will, and the specific 360-degree random position can be terminated, so that the thread crossing is simple and convenient, and the overall production and manufacturing efficiency is reduced.

4. When winding, the number of electromagnetic coils in each layer can be changed flexibly, and the wiring method of different product categories can be completed.

5. Product programming is simple and convenient, with unique mobile phone software, which can be uploaded and stored endlessly. According to simple learning and training, it can be easily grasped.

6. Because the slotting posture of wire pressing is carried out according to the high-performance automatic control system and servo motor, the reliability of the slotting wire can be ensured and the time can be shortened.

7. According to the customer's regulations, we can select the method of manual or automatic manipulator to control the material. -Full-automatic winding machine manufacturer

Website: https://www.zhengtaifeng.com/