Don't look at the big loss, teach you how to check the automatic winding machine regularly

Automatic winding machine belongs to automatic equipment, and it is inevitable that it will break down, but it will be too late to repair it when it breaks down. Therefore, daily inspection is indispensable. Below, I will help you customize the inspection plan and help you eliminate your worries.

Daily inspection:

Daily protective maintenance should be carried out after eight hours of operation. After the day's work, turn off the power of the computer and the machine, vacuum the dust on the back of the machine and clean the dust on the outside of the equipment with a white cloth. If the environment is poor, maintenance operations should be carried out more frequently. Note: Do not use organic solvent to wipe the test, which may damage the paint on the surface of the equipment.

Weekly inspection:

Weekly protective maintenance should be carried out after every 40 operating hours. If the environment is poor, the cycle should be shortened by pneumatic lubrication device. Note: The lubricant and lubricating oil used must be of good quality. Otherwise, it will increase the surface friction of the screw or guide rail, thus shortening the service life of the screw and affecting the accurate positioning of the machine. Warning: Phosphoric acid and oxygenated hydrocarbon synthetic agent should not be used in the gas path of lubricating device or factory. Check the equipment in the lubricating device and add 100CKR lubricating oil if necessary.

Monthly inspection:

Monthly protective maintenance should be carried out every 200 operating hours. If the environment is poor, the cycle should be shortened by pneumatic lubrication device. Check the flow of pneumatic lubricating oil through the observation hole. The flow rate should be divided into 3-5 drops in five minutes. The groove screw at the top of the lubricating device can be turned to the back of the funnel to adjust the flow rate. At the beginning, it should be adjusted to 1/4-1/2, and the clockwise and counterclockwise screw needle will increase/decrease the flow rate of lubricating oil.

The shortcomings of automatic winding machine are classified as electrical, mechanical, transmission and pneumatic (if any), among which the electrical part is divided into strong and weak current, and the winding machine manufacturers usually give an alarm to the vulnerable and easy-to-defect parts in the design, operation and maintenance of their numerical control systems. After the alarm circuit works, on the one hand, it gives alarm information such as sound and light on the display screen or operation panel, on the other hand, it gives maintenance instructions. Porter Automation Network is mainly engaged in all kinds of winding machines, needle inserting machines and riveting machines, providing all kinds of automation products for China and Southeast Asia.

Website: https://www.zhengtaifeng.com/