Automatic winding machines often have problems, which may be the reason!

Fully automatic winding machine can coil and induct electromagnetic coils of various specifications and models, generally including surrounding electromagnetic coils and fixed electromagnetic coils. When setting, there will be some differences between electromagnetic coils with different coils. It is necessary to properly set the main parameters, adjust the coiling support force and the wiring mode, and then we can coil stronger works of art and better-looking electromagnetic coil products. In addition, the automatic winding machine is likely to encounter various difficulties in the whole operation process, and the most common conditions are the following.

1. The electromagnetic coil wire is not wound neatly. When this kind of situation occurs, it is necessary to analyze whether the problem arises during all normal settlement periods or after the commodity is replaced and adjusted. In the former case, most cases are caused by hardware configuration problems, while in the latter case, it is generally a setup problem. The problem of hardware configuration may be caused by the loosening of fixture and fixture, the loosening of fastening screws of wiring organization and the insufficient moistening natural environment of wiring organization, which causes the servo motor to operate under load and causes common wiring failures.

2. The position of the spindle bearing stop is not accurate, which is also a common situation in automatic winding machines. This kind of situation is mainly caused by braking system problems. For example, the car brake pads are loose, or the gray-black car brake pads are worn out. In addition, it has a great relationship with the setting of braking system time. If the setting time is not enough, the accurate positioning of the spindle bearing will be wrong. In order to solve this problem, you must replace the brake pads or adjust the braking system time again.

3. The winding electromagnetic coil is not accurate, or the total number of winding machines is wrong, mainly because of the sensor or control panel problem, which makes the winding machine unable to work normally, so it must be overhauled by the winding machine manufacturer.

4. Abnormal noise comes out during the whole operation of automatic winding machine. The difference of sound is used to distinguish whether there is any abnormal problem in the winding machine. Naturally, this must be distinguished by technical professionals.

During the operation period of the automatic winding machine, the body can't get close to the rotating component after the winding machine runs. If adjustment must be carried out, the actual operation of machinery and equipment must be terminated first. Please ensure your safety after adjustment. Start from the beginning. In addition, operators should not wear gloves, should not use sleeves, and should tie long hair. If there is abnormal noise coming from the winding machine, it is necessary to stop the actual operation immediately and find technical professional staff to carry out maintenance.

Website: https://www.zhengtaifeng.com/