Installation and usage environment of automatic winding machine

The workbench and foundation of the winding machine should have any strength and stress to avoid causing significant vibration when the winding machine moves quickly. It should be ensured that the vibration of the winding machine does not harm its original accuracy and lifespan, nor does it harm the coil quality due to vibration. Adjacent devices and buildings should not pose a defect hazard to the winding machine.

2. The workbench and foundation of the winding machine should have reliability and operational performance, be waterproof, anti-skid, and corrosion-resistant to harmful objects, and ensure that it does not cause deformation or partial settlement. When the winding machine is placed in an environment that may be exposed to chemical liquids, oil, or corrosion, the foundation should be protected with a protective layer. For example, apply acid and oil resistant cement slurry sand on the surface of the foundation, and set up drainage and collection grooves.

3. The foundation of a large wire winding machine should be pre pressed before machine assembly. The quality of pre pressing is 1.25 times the total quality of the winding machine and the larger quality of the customer's product workpiece. The preloading material can be made of steel, sand, and small stones. The preloaded material should be evenly pressed on the foundation to ensure uniform settlement of the foundation. The preloading work should be carried out until the foundation no longer sinks again.

4. The workbench and foundation of the winding machine must be equipped with the same base as the model of winding machine, and it is necessary to ensure that the winding machine assembled on it is stable and reliable. It is necessary to ensure that there is grounding equipment for the surrounding ring, and that there is no significant interference source for the surrounding ring.

5. The center point of the winding machine and the total center point of the workbench and foundation shall be in the same vertical line as far as possible with the centripetal of the foundation bottom.

Website:https://www.zhengtaifeng.com/