The wide range of winding machines should bring convenience to our lives

The winding machine mainly includes a winding shaft mechanism, a supporting mechanism that supports the winding shaft, and a power mechanism that drives the rotation of the winding shaft. The main shaft and hollow shaft of the winding machine are connected together to form a winding shaft mechanism. The diameter of the main shaft hole is determined by the diameter of the multi-core copper wire after winding. By replacing the main shaft with different apertures, multi-core copper wires with different outer diameters can be wound.

The fully automatic winding machine, pioneered by Japan, emerged in response to the increasing demand for labor and product quality. It can be combined into a highly automated device through motors, electric components, pneumatic components, transmission devices, sensors, control systems, etc. Usually, it can automatically arrange wires, wrap ends, break and clamp wires, twist wires, and load and unload materials. Operators only need to ensure sufficient raw materials and timely replacement when there are no workpieces or copper wires to ensure continuous production. Usually, the number of shafts is high to achieve efficient production. Machines with a high degree of automation can meet the requirement for one employee to oversee multiple devices simultaneously.

The center of gravity of the winding machine and the total center of gravity of the workbench and foundation shall be located in the same vertical line as far as possible with the centripetal of the ground base. The foundation of large wire winding machines should be pre pressed before machine installation. The quality of pre pressing is 1.25 times the total mass of the winding machine and the total mass of the customer's workpiece. The preloading material can be made of steel, sand, and small stones. The preloading material should be evenly pressed on the foundation to ensure uniform settlement of the foundation. The preloading work should be carried out until the foundation no longer continues to sink.

The workbench and foundation of the winding machine should have stability and durability, waterproof, anti slip, and harmful object erosion, ensuring no deformation or local settlement. When the winding machine is placed in an environment that may be exposed to chemical liquids, oil, or corrosion, the foundation should be protected with a protective layer. For example, apply acid and oil resistant cement slurry sand on the surface of the foundation, and set up drainage and collection grooves.

The winding machine is widely used in industries such as power, mining machinery, and furniture processing, and is a universal equipment. By calling the production site of winding machine enterprises, it has been found that most of the circular winding machines currently in use have significant safety hazards. If operated improperly, not only will the windings become invalid, but it may also cause serious damage to human fingers. In order to reduce the scrap rate of windings and increase safety, it is necessary to install protective devices for winding machines.

Website: https://www.zhengtaifeng.com/