The winding machine faults of the winding machine manufacturer can be divided into several types

The winding machine produced by the winding machine manufacturer is a very common type of winding and arranging equipment in our modern electrical coil production and processing. It is also an intelligent electrical device that integrates mechanical, electrical, sensing, and centralized data processing. What are the common faults?

Problems such as abnormal startup of the device can eliminate the possibility of component damage, which is generally caused by incorrect settings of the operating parameters of the winding machine. Common problems include setting the number of coils and speed to 0 by mistake. These winding parameters are directly related to the normal operation of the device, and should be checked before starting the device after setting to prevent data setting problems.

During normal operation, sudden automatic shutdown presents similar problems. The key points to be investigated are the working conditions of the main shaft transmission mechanism and various drives of the wire winding machine, and the removal of hardware defects. In terms of parameter settings, it is important to check whether the speed setting of the wire winding machine by the automatic wire winding machine manufacturer is too high, whether the wire diameter parameter setting is incorrect, and whether the width of the automatic wire winding machine is consistent with the skeleton requirements.

Failures caused by the imperfect maintenance system of the user unit and the lack of necessary regular maintenance and lubrication of the equipment are the main reasons for the failure of the fully automatic winding machine manufacturer's winding machine. Problems such as abnormal temperature rise of the bearings, serious leakage of lubricants, discoloration of the bearings, and so on are addressed by establishing a good equipment maintenance system, assigning special personnel to regularly maintain the equipment, and regularly oiling and inspecting the lubricating components, Replenish lubricant in a timely manner and select appropriate lubricant, timely adjust the position of the housing shoulder, and remove foreign matters near the bushing.

Compiling a reasonable program for the winding machine and running it successfully is the basis for determining whether the system function of the entire machine is intact. Some incorrect winding parameter settings may cause system failures or invalid functions. Sometimes, due to user program errors, a fault shutdown can be caused. Therefore, a trial run program can be prepared to check and correct user program errors to ensure normal operation.

网站:https://www.zhengtaifeng.com/