In batch production, strictly control the tension of winding machine manufacturers.

At present, in some winding machine manufacturers, all the winding machines we see are manual, because the advanced instruments in this field are not popular in China at present, so we can only use the original strength to achieve better results. After all, if we only rely on manpower to operate, it will take a lot of effort and energy, and the efficiency will be very slow.

Weiding Winding Machine Manufacturers It is understood that some manufacturers have started to use automatic winding machine nozzles as their own winding tools, which can save a lot of effort and time. Therefore, the machine is actually better to be automated, and only automation can save more money.

The necessary condition to realize automatic winding of Weiding winding machine is the cooperation of pay-off device and tension control. When winding fine enameled wire, because the wire diameter is small, if the tension is too large, the wire will be elongated. In batch production, the instability of tension will also cause a large DC resistance difference between coils, so the tension should be strictly controlled. Therefore, after technical upgrading, the current winding machine adopts tension indicator, which is a mechanical tension indicator, and how many grams of winding tension can be known by the pointer scale, thus avoiding the deviation caused by the operator's adjustment by experience. The pay-off Zhang Liqi of thin thread is generally spring friction plate type, which can fully meet the requirements after careful adjustment.

The spindle power mechanism of our common thick wire winding machine is generally equipped with a deceleration mechanism to increase the spindle torque and reduce the rotating speed of the equipment. The maintenance of the deceleration mechanism in the daily winding machine maintenance project is one of the important equipment maintenance links, and its reliability directly affects the normal operation of the equipment. Usually, the maintenance points of the spindle power mechanism of the winding machine are generally as follows.

First, judge whether the temperature rise of the spindle power mechanism is normal and whether there is oil leakage in the slewing bearing.

Second, check the smoothness of spindle rotation and whether the gear clearance is normal.

Third, whether the runout value of the main shaft measured by the longitudinal shear line of silicon steel sheet is within the normal range and whether the bearing wear is normal.

网站: