What are the characteristics and advantages of processing alumina ceramics

There have been significant discoveries in the processing technology of alumina ceramics. The advantages of this ceramic structure can improve the life and efficiency of mechanical equipment. Today, Zhengtaifeng Co., Ltd.  Factory will introduce this ceramic structure to you. Alumina ceramic raw materials with high heat resistance, compressive strength, stress relaxation resistance, wear resistance, good dielectric strength, light weight and other characteristics, is an ideal structure of alumina ceramic raw materials, in many industrial sectors have been widely used with the progress of science and technology

Exhibition trend, its main uses continue to develop, as a new type of structural ceramic material has been used in high-power generator parts, mechanical processing parts, electronic technology in the field of components and other new fields of science and technology

https://www.zhengtaifeng.com/en/Ceramicproducts/570.html

The application of these new fields of science and technology requires higher performance of alumina ceramic materials. Due to the brittleness of alumina ceramic materials, its application scope is limited. In order to overcome the brittleness of ceramic materials, improve the reliability, toughening is a problem faced by contemporary ceramic scientists.

In order to enhance the mechanical strength of alumina ceramics, a new technology has been introduced abroad to strengthen alumina ceramics. The new technology is relatively simple. The main method is to use electrons to carry out vacuum coating or chemical vapor deposition on the surface of alumina ceramics. The surface of alumina ceramics is coated with a thin film of silicon compounds, which is heated mainly between 1200 and 1500 degrees to promote the strengthening of alumina ceramics.

One of the key factors for alumina ceramic abrasives to be damaged is the strong external force. In the whole process of commercial application, once the impact force or working pressure, it will cause the alumina ceramic parts damaged or crushed. Therefore, it should be prevented as much as possible in the operation process and block collision, reduce the damage.