Characteristics of magnetic damping tensioner

Magnetic damping tensioner Characteristics Magnetic damping tensioner is the winding machine in the winding of the adjustable tension of the link component, so that the enameled wire winding with appropriate tension, so that the winding of the coil is suitable for tightening, fastening fullness, to ensure the consistency of the coil technical indicators. When you produce products based on enamel-based wire, you will encounter broken wire, loose wire and other bad, as well as the other titles brought by them, our company's production of magnetic tensioner will be your disposal of these titles a good helper. This magnetic damping tensioner is widely used in metal data to fiber data, enameled wire, fishing line, metal wire, belt core bone, etc. 、、、、、、 winding requires stable and durable tension control occasions. a. Magnetic damping tensioner, also known as permanent magnet tension manipulator, is a device that transmits stable torsion force with magnetic field as the foreword. Damping plate and magnet do not touch, no sliding friction, so the use of long life, tension control is extremely not chaotic. b. The tumbling parts are fine machined with light and consolidated data, and the tumbling inertia is very small. c. The tension output rubber wheel is made of elastic soft rubber, and does not damage the line. d. The metal parts are treated with rust prevention and excellent corrosion resistance. e. The device is simple in structure, easy to adjust the tension, compact in structure design, fine in volume, and can be operated in various directions without disorder.

https://www.zhengtaifeng.com/en/WireTensioners/318.html

At present, Mr Technology has achieved a lot of research results, and many Mr Dampers have been applied in engineering, mainly in the fields of automobile, machinery and building structure. ZHENGTAIFENG is a professional manufacturer integrating research, development, manufacturing and sales of tensioner and magnetic dampers, mainly producing: tensioner series, magnetic dampers series, tensioner, magnetic dampers, magnetic dampers, dampers.

The tension bar shall not be higher than the red line when the magnetic damping tensioner is working. In the working process, only tension is allowed to increase from the minor key, not from the major key. The tension needs to be adjusted by the major tone, and must be adjusted in the stop condition to avoid breaking the line. If tension pulsation occurs during adjustment, first turn the tension control dial to the right to the maximum tension, and then slowly return to the required tension area for readjustment. The tensioner should not exert too much force during equipment, which will affect the robustness of the embedded parts. Prevent drops, which will damage ceramic pieces and enclosures. The locking screw should be aligned with the exit shaft plane when the tension rod is used. When using the line and the model does not match do not far-fetched use. Damper wheel inside to stop participating in any grease. Do not open the back cover of their own scheduling. Replace wool loops often to avoid clogging the spout. If there is abnormal sound or not turn over the wire wheel, please replace it in time, because the bearing has been worn. If the damping wheel is sliding, please rub the O-ring inside the damping wheel with a cotton thread dipped in alcohol. To remove waxy grime from enameled wire. Adhere to the production site clean, long time dust accumulation simple wear tensioner parts. If you do not use it for a long time or use it for a long time, if there is tension instability, please stop the machine and turn the handle from small to large and from large to large. Repeated several times, can be restored to the initial condition. If the magnetic tensioner with cylinder is used, the air pressure shall not be less than 5 kg.