Static friction and run-out range control of plastic flanged ceramic pulley

The structure of the plastic flanged ceramic pulley is to place a ceramic snare on the outside of the bearing. When the wire and wire pass on the surface of the ceramic ring, the ceramic ring rotates with the wire and wire, thus converting the sliding friction into static friction. But when starting and stopping, in order to overcome inertia, there will be local sliding friction.

https://www.zhengtaifeng.com/en/Ceramicproducts/291.html

The difference between plastic flanged ceramic pulley and ceramic eye is that the wire, wire and surface are sliding friction when the ceramic eye is used. It is used in the occasions where the Angle of the wire and wire is small, the positive pressure is small and the requirements are not high. The wire wheel is mainly used by static friction (local sliding friction). It is used in the situations where the Angle of wire and wire varies greatly, there is a certain positive pressure and high requirements are required. This ceramic conductor wheel is suitable for enameled wire to change direction and guide proper amount. Product Description: The middle porcelain wheel is made of ultra-fine polishing, equipped with high-speed bearings, which can make the beating in a small range when winding, and maintain the stability of the tension when winding.

https://www.zhengtaifeng.com/en/Ceramicproducts/654.html