Winder guide needle manufacturers to analyze the key to smooth and beautiful coil

• 
  

• 
  

• Winder guide needle manufacturers to analyze the key to smooth and beautiful coil:

This is a problem that has been troubling coil processing enterprises. The winding machine can not wind a smooth, beautiful and solid and beautiful coil. Why is this? Is there still a big gap between our winding equipment and imported equipment? In fact, after our country's winding equipment industry experienced independent technology research and development, its performance and precision can be completely comparable with imported high-end, so what is the problem?

https://www.zhengtaifeng.com/en/Coilseries/

1. First, special wire such as the glue line, enameled wire, etc., processing the wire with our common enameled wire processing is, the larger the difference, processing equipment should configure a dedicated line wheel and the tensioner, wire diameter should be paid attention to when in the parameter set to the appropriate increase, because the wire skin have a special package is not too smooth layer, so the wire diameter is generally larger than nominal value.

https://www.zhengtaifeng.com/index.php/en/Coilseries/295.html

2. Common fine wire processing, we generally call the line below 0.3 as fine wire, fine wire processing is generally more prone to the problem of wire breakage, mostly in the start and stop process, so we must use the slow start and slow stop function of winding equipment, so as not to pull the wire rod broken.

https://www.zhengtaifeng.com/index.php/en/CoilWindingNozzle/226.html

3. The thick thread processing is what we are most familiar with, it is important to note should strictly control winding speed, fast speed can make coil arranged untidy, tension also can appear the phenomenon of large and small, now copper prices remained high, many manufacturers use aluminum wire, is also must pay attention to the two kinds of wire tension requirement completely different, In the case of the same wire diameter, the tension of aluminum wire only needs one third of that of copper wire, which is one of the main reasons why many users have external insulating paint explosion. Winder guide needle manufacturers to analyze the key to smooth and beautiful coil

https://www.zhengtaifeng.com/index.php/en/CoilWindingNozzle/