The actual value and setting value of the tension of the winding machine tensioner

The actual value and setting value of the tension of the winding machine tensioner：

There are measurable types, floating rollers, and so on.

To put it simply, general tension controllers only need to perform two basic operations of installation, debugging and fine -tuning, and other specific parameters depends on the required specific functions.

The installation and debugging steps of the winding machine tensioner are very simple. It can be taken step by step according to the instructions. Generally, it is clear zero. Determine and other models depends on different models.

Filtering is based on tension control system with PID setting function.

For a controller, the PID setting generally adjusts the following: Generally, the slightly divide D value is set to zero, and the integral i is set to a small number between 5-10 and the P value is changed from small to large until the system can adjust until the system can adjust until the system can be adjusted until the system can be adjusted until the system can be adjusted. Stable, when P is adjusted, add an external interference to see the time required for the system to return to the balance. If it is too slow to increase the I value, until the satisfaction effect is achieved, the general system changes after two cycles to reach the best.

As for the most basic role of the tension controller, of course, control tension, use the constant tension system as an example.

Comparison of the actual value of the tension and the set value to control the output value.