A brief introduction to the production process of solid ceramic rods

Solid ceramic rods are generally processed by zirconia ceramics and alumina ceramics, so it is also a high-temperature resistant ceramic rod with many excellent properties and is widely used. The following Kezhong Ceramics Factory will briefly introduce the production of solid ceramic rods craft.

The application of ceramic rods is very extensive, especially in chemical industry, aviation, machinery and other related fields. However, due to the difficult forming characteristics of ceramics, the process flow is very complicated and the technical difficulty is quite high. Ceramic materials generally need to go through the cutting, grinding, grinding and polishing processes of the blank. After these processes, the formed ceramic parts have the characteristics of non-absorbent, high-temperature firing, non-fading, and easy to clean.

Blue Solid Ceramic Rod

Ceramic rods have no plastic deformation at room temperature, and ceramic rods are the most serious. Its compressive strength is very high, but its strength in impact resistance and bending resistance is relatively small, and it usually suffers from brittle fracture. According to the ratio of ceramic raw materials, the theoretical strength of ceramics is very high, but the actual strength is only about 1% of the theoretical strength. The reason is that the conditions, processes and structures of ceramic sintering are also different. In addition, creep may occur when ceramics are heated to the critical temperature of porcelain, and creep will become more pronounced at high temperatures.

That is, during the sintering process, the creep of porcelain often pulls the metal to deform, especially the repeated sintering of multi-unit ceramic rods, the possibility of deformation is greater.

Website: https://www.zhengtaifeng.com/