Machine feature:
This machine design of 32 bit controller chip, It’ll be faster, and higher reliability.In Chinese and English display,easy to operation,winding data retention after power failure, not to discarded products.All the parts for this machine are imported prats,such as:Japan Bearing (NSK,NTN),Japan BANDO belt ,Japan GATES belt ,Taiwan Ball screw (TBI),Taiwan Transducers and so on.The machine uses four spindle synchronous design, with cast body , high speed, low voice, good choice for high quality products.
Function and feature:
A This machine is for corrugated resistance wire manufacturers to research and development , have a ripple voltage wire and ordinary wire winding.
B Adopt imported guide rails with ball screw, tailstock using strong top and tail spindle synchronization, the performance is more stable and reliable.
C Using inverter technology to control pressure ripple motor and the main motor to ensure the accuracy of its coiled.
D Pressure ripple and winding at the same time, molding at once.
Application range:
Elevator resistance distribution phase resistance and various large-scale resistance.
Specification:
| Spindle number | 1 |
| Loop diameter | 220mm |
| Max wire distance | 9.9mm |
| Max winder width | 600mm |
| Max speed | 0~500turn/min |
| Spindle motor | Three-phase motor+1HP Phase motor+AC Drivers |
| Winder motor | Stepping motor |
| Puts the coil size | 150×150 |
| The max outer winder diameter | 200mm |
| Resistance alloy wire | (0.1-0.5)×(1.0-5.0)mm |
| Corrugated motor | Three-phase motor+1HP Phase motor+AC Drivers |
| Input power | 220V 50HZ/60HZ |
| Package size | 1390*1240*1450mm |
| Gross weight | 376kg |